Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 58)

53

Enable: Check to enable remote web management.

Port: The management port open to outside access. The default value is 80.

IP Address: Specify the range of the IP addresses of the computers on the internet
to allow remote management of the router's settings.
NOTE:
1. If you want to log in the device's Web-based Utility via port 8080, you need to use
the format of WAN IP address:port (for example http://220.135.211.56:8080) to
implement remote login.
2. If your WAN IP address starts and ends with 0.0.0.0, it means all computers on the
Internet can perform remote web management. If you change the Internet IP address
to 218.88.93.33 - 218.88.93.35, then only the computers at the IP addresses of
218.88.93.33, 218.88.93.34 and 218.88.93.35 can access the router to implement
remote web management.
For example:
If you want to allow the computer at the IP address of 218.88.93.33 to access the router's
web-based utility via port 8080, please set the parameters as shown in the example
screenshot.