Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 22)

17
The “Connect on Fixed Time” setting goes into effect only when you have set the
current time in “Time settings” from the “System tools” menu.
Static IP
If your ISP provides you with a static IP, please choose static IP. You will need to enter the
IP address, subnet mask, gateway, DNS server, and alternate DNS server provided by your
ISP or network administrator.
 Mode: Shows your current connection mode.
 IP address: Enter the WAN IP address provided by your ISP. If you are unsure of
what it is, please contact your local ISP for assistance.
 Subnet mask: Enter the WAN Subnet Mask provided by your ISP. Generally it is
255.255.255.0.
 Gateway: Enter the Gateway provided by your ISP. If you unsure of what it is, please
contact your local ISP for assistance.
 DNS server: Enter the necessary DNS server provided by your ISP.
 Alternate DNS server: Enter the secondary DNS address if your ISP provides one
(this is optional).
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means every time you access the Internet, you
will get a different IP. You don't need to enter any parameters in this mode, just click Ok to
finish the settings.