Night Owl NODVR108-500GB - Manual (Page 37)

36
13.2 Motion Detect Menu
The Motion Detect Menu allows you to configure the motion detection
settings of the DVR.
To access the Motion Detect Menu select Record Functions from the Main
Menu, and then Motion from the Record Functions menu.

MD Channel: Select the channel to make adjustments.

MD Status: This allows you to turn the motion detection settings
On/Off. It is recommended to keep these settings On to ensure that
videos will be recorded.

Sensitivity: This indicates the level of sensitivity of the camera.
The lower the sensitivity, the more motion will be needed to start
recording.

Set MD Mask:
Select the “Setup” button to block out areas that may
have constant movement such as trees or roads.
Chapter 13 Record Functions Menu