Night Owl NODVR108-500GB - Manual (Page 65)

64
19.1 Checking the Ports after Port Forwarding
Once you have forwarded the necessary ports on your router, you should
check to ensure that they have been correctly forwarded.
1. Go to http://www.yougetsignal.com/tools/open-ports/ .
2. Type in port 9000 and select the Check button to see if the port test
as open or closed.
3. Type in port 2049 and select the Check button to see if the port test
as open or closed.
4. Type in port 2050 and select the Check button to see if the port test
as open or closed.
5. All ports should be open as shown in the example below.
6. If any port tests as closed then that port is not forwarded correctly.
Chapter 19 Port Forwarding
Write “your external address” in the Information Log at the end of
the manual.