Night Owl NODVR108-500GB - Manual (Page 49)

48
To access the PTZ Quick Functions right click anywhere on the screen with
the mouse and then select PTZ and then Cruise Setting.

Ch.: Select the channel to make adjustments.

Cruise Point: This will represent the number of points that you have
configured.

Current Point: This is a position that the camera is at before it
moves during the rotation.

Pause Time: This is amount of seconds that the camera will stay on
each point during Cruise.

Slip: This will move the camera to the default position.

Setting Point: This will allow you save relative parameters.

Delete: This will allow you delete one selected preset.
To set a preset point:
1. Select a channel you desire to set a preset point
2. Adjust the camera in a desired direction
3. Click Setting Point to set the point as preset point
4. Click Apply to save the preset point
Start Cruise
When the Cruise Settings are configured, use the Start Cruise option on
the Quick Functions Menu to start the cruise. This just means that the
camera will constantly rotate.
Chapter 16 Camera Menu