Night Owl NODVR108-500GB - Manual (Page 59)

58
4. Change the last three digits to 150. You will need this new number
in a later step. Example, you wrote down the IP Address
192.168.0.104. When the last digits are changed the IP address will
now be 192.168.0.150.
5. Write this number down on a piece of paper. This IP Address is
what you will use as the IP address of your DVR in the next section.
6. Find the Default Gateway.
7. Write down the Default Gateway number. This is the IP address of
your router. You will need to enter this in the DVR’s network
settings for it to work properly.
Chapter 18 Remote Access