Chapter 8 camera installation – Night Owl STA-88 User Manual
Page 20
19
8.2 Mounting the Cameras
1. Choose a Position: Decide where you would like to mount the
camera.
2. Screw Positions: Mark three holes on the surface where you plan to
mount the camera, using the holes in the camera base as a guide.
3. Anchor Screws: Using a drill bit slightly smaller than the included
screw anchors, drill into the mounting surface using the guide
marks placed in the previous step. Insert the screw anchors.
4. Mount Camera: Hold camera in place and tighten each screw
securely into the anchors.
5. Ensure Camera is Secure: Once screwed into place, make sure
that the camera is securely mounted by placing gentle pressure on
the mount.
6. Adjust: Adjust the camera housing to point the camera lens in the
direction you would like to record.
Chapter 8 Camera Installation
Don’t feel like installing the system yourself?
Let InstallerNet do the work for you.
Contact us at 1-800-806-5513 or visit us at