Chapter 18 remote access – Night Owl STA-88 User Manual

Page 67

Advertising
background image

66

4. Find the IPv4 Address (or may be named IP Address in some

versions of Windows).

5. Change the last digits to 150. Example, you wrote down the IP

Address 10.1.10.11. When the last digits are changed the IP

address will now be 10.1.10.150.

6. Write this number down on a piece of paper. This IP Address is

what you will use as the IP address of your DVR in the next section.

7. Find the Default Gateway.

8. Write down the Default Gateway number. This is the IP address of

your router. You will need to

enter this in the DVR’s network

settings for it to work properly.

Chapter 18 Remote Access

Advertising
This manual is related to the following products: