Wixey WR500 ELECTRONIC DIGITAL READOUT - Manual (Page 5)

5
•
INC/ABS- This button
switches the readout from ABS
(absolute) to INC ( incremental)
measuring mode (16). ABS
(absolute) is the standard mode used
and the letters “ABS” are displayed.
When the planer has been properly
calibrated the readout will display
the actual distance from the bed of
the planer to the tips of the planer
blades. This will show the actual
final thickness of a board that will
come out of the back of the planer.
When in INC (incremental) mode the
letters “INC” are displayed.
Anytime the INC button is pushed,
the displayed reading will become
0.000in. or 0.00mm. If the button is
pushed again the readout will revert
back to the ABS mode and display
the true calibrated absolute reading.
The absolute reading is remembered
at all times regardless of which
buttons are pushed.