Posey KeepSafe® Essential - Manual (Page 14)

14 KeepSafe ® Essential

Mounting the KeepSafe Essential
The Posey KeepSafe Essential comes with two mounting brackets:
• One (1) for wall or chair mount (Cat. No. 8276 (without wire clip).
• One (1) for bed mount (Cat. No. 8276).
For additional brackets, call Posey Customer Service at 1.800.447.6739 or
1.626.443.3143
Before each use, check that:
• Alarm is securely mounted out of the patient’s reach and functions
properly by activating alarm (see pages 17-18).
• Indicator lights are in clear view of staff.
Bed Mount
NOTE: The KeepSafe Essential comes with a standard bed bracket that
fits boards ½” – 2” (1 cm – 5 cm) thick.
1. Use wire bracket (Cat. 8276) for head or footboard mounting (fig. 9).
2. Slide alarm onto bracket from top down until it is firmly in place
(fig. 10).
3. Choose location on head or footboard where patient cannot reach or
tamper with the alarm or connections.
4. Pull bracket wire away from alarm to create an opening wide enough
to fit the head or footboard. Slide bracket onto bed and push down
to ensure a snug fit (fig. 11). Make sure indicator lights are in clear view
of staff.
5. To remove alarm, gently push release lever In while sliding alarm up
and out (fig. 12).
PULL L
EVER SLIDE O
UT
Fig. 9 - Wire Bracket
HOLD/SU HOLD/SU SPEND
Fig. 11
Fig. 10
PR ESS
Fig. 12