Wall mount, Keepsafe, Essential 15 – Posey KeepSafe® Essential User Manual

Page 15

Advertising
background image

KeepSafe

®

Essential

15



Wall Mount

1. Choose a location out of the patient’s reach, but with indicator lights in clear view of staff.
2. Use wall/chair bracket (Cat. No. 8276 (without wire clip), (fig. 13).
3.

Screw attachment:

• Position wall bracket with back (flat side) against wall (fig. 13).

• Using bracket as a guide, mark spots to insert anchors into wall.

Make sure it is safe to drill and there are no pipes or electrical wires that could be

damaged.
• Drill holes where marked and insert anchors.

• Position bracket over holes. Insert and tighten screws.
4. Slide alarm onto bracket from top down until it is firmly in place.
5. To remove alarm, gently push release lever In while sliding alarm up and out (fig. 14).

Fig. 14 - alarm/Bracket

(Front View)

RELEaSE LEVER

SUSPEND

SLIDE

aLaRM

UP

Fig. 13 - Chair/Wall

Bracket (Front View)

RELEaSE

LEVER

SCREW

hOLES

Advertising