Posey KeepSafe® Deluxe - Manual (Page 16)

16 KeepSafe ® Deluxe

Mounting the KeepSafe Deluxe
The KeepSafe Deluxe comes with two mounting brackets:
• One (1) for wall or chair mount (Cat. No. 8276 (without wire clip).
• One (1) for bed mount (Cat. No. 8276).
For additional brackets, call Posey Customer Service at 1.800.447.6739 or
1.626.443.3143.
Before each use, check that:
• Alarm is securely mounted out of the patient’s reach and functions
properly by activating alarm (see pages 19-20).
• Indicator lights are in clear view of staff.
Bed Mount
NOTE: The KeepSafe Deluxe comes with a standard bed bracket that fits
head and footboards ½” – 2” (1 cm - 5 cm) thick.
1. Use wire bracket (Cat. 8276) for head or footboard mounting (fig. 11).
2. Slide alarm onto bracket from top down until it is firmly in place
(fig. 12).
3. Choose location on head or footboard where patient cannot reach or
tamper with the alarm or connections.
4. Pull bracket wire away from alarm to create an opening wide enough to
fit the head or footboard. Slide bracket onto bed and push down to
ensure a snug fit (fig. 13). Make sure indicator lights are in clear view of
staff.
5. To remove alarm, gently push release lever IN while sliding alarm up
and out (fig. 14).
6. Make sure sensor and/or nurse call cables can be secured out of the
way and do not present a tripping hazard.
PULL L
EVER SLIDE O
UT
Fig. 11 - Wire Bracket
Posey
Fig. 13
Fig. 12
PRES
S
Fig. 14