Bed assembly – Posey Bed 8060 User Manual
Page 22
Installing the IV Post Mount Bracket (Part
Q) from Below the IV Post
1. Position the Slider Bar (Part D) below the IV
post opening.
2. Attach the IV Post Mount Bracket to the Slider
Bar by aligning the IV Post Mount Bracket with
the post opening (Fig. 50).
3. Align the wedge of the bracket (Fig. 51).
4. Repeat steps two and three on the other side
of the IV post.
5. Insert the two IV Post Mount Brackets inside
the IV post (Fig. 52).
Fig. 50
D
Fig. 51
6. Tighten the top Allen Head Screw using the
3/16” Allen Wrench (provided) (Fig. 53). The IV
Post Mount Bracket must be tightened so it
does not move during bed articulation.
7. Repeat on the other side.
8. Tighten the side Allen Head Screw (Part M).
9. Repeat this step on the other side.
Fig. 53
Q
Q
Bed Assembly
22
Posey Bed - 8040, 8050, 8060
Fig. 52