Vaisala HMP42 - Manual (Page 68)

HMI41 AND HMP42
Operating Manual
M210317EN-A
64
Table 4.2 Giving parameters in Windows 95 and Windows NT
WINDOWS 95 WINDOWS NT
MENU WHAT TO DO MENU WHAT TO DO
Start Start
ò
move the cursor to:
ò
move the cursor to:
Programs Programs
ò
move the cursor to:
ò
move the cursor to:
Accessories Accessories
ò
move the cursor to:
ò
move the cursor to:
HyperTerminal click HyperTerminal
ò
move the cursor to:
ò
move the cursor to:
Hypertrm double click Hyperterminal click
т т
Connection
Description
type the name of the
connection (e.g.
HMI41) in the
appropriate field
and select an icon if
available; click OK.
Connection
Description
type the name of the
connection (e.g.
HMI41) in the
appropriate field and
select an icon if
available; click OK.
ò
Phone Number
move the cursor to
the field
CONNECT
USING and select
'direct to COM x'
(x = serial port
available); click OK
Connect to
move the cursor to
the field
CONNECT
USING and select
'COM x' (x = serial
port available); click
OK
т т
COM x properties
select parameters
according to the list
on previous page;
click OK
COM x properties
select parameters
according to the list
on previous page;
click OK
Turn the HMI41 on and follow the instructions in Chapter 4.2