Vaisala HMT140 - Manual (Page 26)

Mounting
18 VAISALA
Figure 6: Drilling specifications
Optional Mounting Accessories
Probe Mounting Flange
The probe mounting flange (Vaisala order code: 226061) is a
general purpose mounting flange for 12 mm diameter probes.
It can be used to hold the HMP110 probe in a through-wall
installation.
Note: The coaxial silicone plug that is delivered with
the flange is not suitable for use with the probe
cable of the HMT140.
Figure 7: Optional Probe Mounting Flange
Probe Mounting Clamp
The optional mounting clamp (Vaisala part #: 226067)
makes it easy to install the probe on the wall of the
measurement environment. The probe can be detached for
calibration simply by loosening the lower screw.