Vaisala HMT140 - Manual (Page 56)

Calibration and Adjustment
48 VAISALA
Figure 17: Remote Probe Model
The following numbers refer to Figure 17
1 Probe cable
2 Sleeve securing the probe to the cable
3 HMP110 probe
Calibration and Adjustment
HMT140 parameters are calibrated and adjusted using
viewLinc.
To view calibration status:
 On the Info tab, click Get. This page will display calibra-
tion information including calibration date, calibrator,
and next calibration due date.
Please refer to the viewLinc administrator’s guide for further
information, or visit www.vaisala.com.
1
2 3
1
2 3