Vaisala AWS330 - Manual (Page 95)

Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 93
Installing Enclosure to Wall
The correct installation height for the enclosure is approximately 1.5 to
1.7 m (eye height for best working access).
Insert the four installation screws through the mounting holes of the wall
mounting plate attached to the back of the enclosure; see Figure 49
below.
1101-014
Figure 49 Installing Enclosure to Wall
The following numbers refer to Figure 49 above:
1 = Hexagonal head lag screw M6x50 DIN571 Fe/Zn, 4 pcs; use
wrench 10 mm
2 = Washer, fender Ø6.6 DIN440 Zn, 4 pcs
3 = Anchor plug 8x40, 4 pcs, Ø8 mm depth 50 installation hole
4 = Concrete or brick wall
5 = Enclosure