Vaisala MMT310 - Manual (Page 37)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 37
Table 9 Setting, Scaling and Testing Analog Outputs
Command Description
AMODE Set analog outputs (0/4 ... 20 mA or
0 … 5/10 V, 1 … 5 V available through
scaling)
ASEL Select parameter for analog outputs
ASCL Scale analog outputs
ITEST Test analog outputs
AQTEST Test analog outputs for desired readings
AERR Change analog error output value
Table 10
Other Commands
Command Description
? Check transmitter settings
?? Check transmitter settings in POLL mode
ECHO [ ON/OFF] Serial bus echo
FILT Set result filtering
FIND All devices in POLL mode send their
addresses
HELP List commands
RESET Reset transmitter
ERRS List error messages
OIL [ON/OFF] Enable/disable ppm output when
measuring moisture in oil.