Red Lion LEGEND - Manual (Page 16)

PROGRAMMING SCALING MODULE (Cont’d)
RATE SCALE MULTIPLIER (RATE SCM)
The Rate Scale Multiplier is used with the rate scale factor and rate
conversion factor to scale the rate display value for the proper units of measure.
The scale multipliers available are; X 1, X 0.1, X 0.01, X 1000, X 100, or X 10.
RATE CONVERSION FACTOR (RATE PER)
The Rate Conversion Factor is used to display the rate value in the proper
time units of measure, per second (X1), per minute (X60), or per hour
(X3600) for the desired time units for the Rate display.
DECIMAL POINT (DP)
There are six Decimal Point locations available for the Rate and Count
displays. The decimal point is programmed individually for the Rate and
Count displays. The decimal point location programmed for the Rate display
will also be the same for the Peak and Valley displays.
-14-