Red Lion LEGEND - Manual (Page 43)

-41-
VARIOUS SENSOR OUTPUT CONNECTIONS [See Note 1]
COUNT SWITCH OR ISOLATED TRANSISTOR OUTPUTS SENSORS WITH -EF SENSORS WITH CURRENT SINK SENSORS WITH CURRENT
CURRENT SOURCE CONNECTED CURRENT SINK CONNECTED OUTPUT-CURRENT SRC CONN. OPEN COLLECTOR (NPN O.C.) SOURCE OUTPUT (PNP O.C.)
(COUNT ON OPENING) (COUNT ON CLOSING) (COUNT ON FALLING EDGE) (COUNT ON TURN-ON) (COUNT ON TURN-OFF)
2-WIRE PROXIMITY SENSORS MAGNETIC PICKUPS A.C. INPUTS FROM INVERTERS, INTERFACING WITH CMOS INTERFACING WITH TTL
CURRENT SOURCE CONNECTED TACH. GENERATORS, ETC. CIRCUITRY (B TYPE)
(COUNT ON CURRENT FALL)
* SEE
NOTE 2
* SEE
NOTE 2
* SEE
NOTE 2
SEE NOTE 4 FOR INPUT
VOLTAGES GREATER
THAN +12V.
RLC SENSOR MODELS: PR & RR PHOTO-ELECTRICS RLC SENSOR MODELS: LMP-EC RLC SENSOR MODELS: ASTC, LMPC, LSC,
PSAC, RPGB, RPGC, RPGH
A.C. SIGNALS OVER 50VAC PEAK
SHOULD BE ISOLATED BY A STEP
DOW N TRANSFORMER.
NOTE: IF EXTERNAL SUPPLY IS USED
TO POWER CMOS CIRCUIT VOLTAGE
MUST BE > DC OUT VOLTAGE.
NOTE: CIRCUIT SHOW N FOR STD. TTL
OUTPUT. TTL CIRCUITS ARE AVAILABLE
W/OPEN COLLECTOR OUTPUTS
ELIMINATING NEED FOR DIODE CLAMP.
* SEE
NOTE 2