4 split range, 5 dimensions, 4 split range -4 4.5 dimensions -4 – ARI Armaturen ES11 EN User Manual
Page 4
Advertising
Page 2-4
Rev. 0040601000 1014
Operating and installation instructions
Electronic positioner ES11
4.4 Split range
In split range mode, it is possible to utilise only part ranges of the entire actuating signal.
For example, the actuating signal 0...20 mA sets the part range 50...100%, which
corresponds to the range 10...20 mA.
The part ranges are set with the zero point adjusting screw (N) and with the slope span
adjusting screw (S).
Infinitely variable part ranges over 20% are possible.
The smallest possible part ranges are specified in the table below.
0-20%
0-40%
0-60%
0-80%
0-100%
20-40%
20-60%
20-80%
20-100%
40-60%
40-80%
40-100%
60-80%
60-100%
80-100%
4.5 Dimensions
fig. 1
Advertising