VariZoom VZCINEMAPRO-K2 - Manual (Page 16)

- 15 -
Manual control on axes during playback- It is possible to isolate a specific axis or axes
to be disabled from playing back while the other axes play back the move.
From the main screen select the “enl” option.
Then select which axis you’d like to disable from playback
On the lower left, next to “playback” it will display either “active” or “live”
When “active” is displayed, the axis will be played back during a move.
When “Live” is selected, the axis will be disabled from playback, but you will be able to
control that axis with the controller while the other axes playback the move.
Note: When selecting a take for playback, or recording, hold the “stop” button while
turning the setup knob. This will skip to the next take that has a move recorded. I.E. if
you have a move recorded on take 2, and a move recorded on take 12, and moves 3-11
are blank, this will scroll the numbers directly from take 2 to take 12.
Delete a take- Select the take that you want to erase.
While holding “stop” press “record” This will then erase the move that is stored on the
selected take.
10. The Intervalometer
The intervalometer allows recorded moves to be played back over a specified time and,
when camera sync is enables, will control the number of frames that will be taken during
that time. To activate the intervalometer, select the “record/play” option from the setup
screen.
Select “playback time”.