VariZoom VZCINEMAPRO-K2 - Manual (Page 19)

- 18 -
13. PT-Z
PT-Z is the menu where you can change the Pan/Tilt sensitivity according to the position
of the zoom axis.
PT-Z can be adjusted between 0-100. The greater the number the slower the pan and tilt
axes will respond according to the position of the zoom axis. When 0 is selected, zoom
will not affect the pan and tilt axes.
Note: This is only accurate when using the Varizoom TOC system, Preston MDR2,
Canon lens with digital servos, or Fujinon lens with digital servos. If you are using a
Canon or Fujinon lens with Analog Servos, the zoom positions will not be accurate, and
with feature will not function properly.
14. Servo Tuning
Servo tuning is changed from the “tuning” option in the second setup menu.