Videoswitch CMOR D2 Dome - Manual (Page 15)

CMOR Dome
Videoswitch Page 12 Vc601i.doc
2 Installing the Dome
These installation instructions assume that a standard wall-mount bracket is being used. For
swan-neck, pendant and corner options, refer to their specific instruction sheet.
2.1 Fixing the mounting ring or plate
• Fix the mounting ring to the wall using four screws (A) of adequate size and
strength to support the weight of the dome and bracket.
• Fit the umbilical cable, entering either through the wall or via a cable gland as
illustrated below.
Note that a mounting plate is now being supplied in place of this ring. In this case for bottom
entry, the knockout in the bottom of the plastic bracket covers must be removed.