Videoswitch CMOR D2 Dome - Manual (Page 31)

CMOR Dome
Videoswitch Page 28 Vc601i.doc
5.5.1.5.3 Joystick Focus
There are two settings; Auto & Manual. The default setting for NIGHT is Manual.
5.5.1.5.4 Preset Focus Mode
There are two settings; Auto & Stored. The default setting for NIGHT is manual.
5.5.1.5.5 Zoom Limit
5.5.1.5.6 Backlight Compensation
5.5.2 Context Camera
5.5.2.1 Not available
5.5.3 Invert Image
This inverts the image. This option is used only if the dome is mounted upside down.
5.6 Keyboard
This sub menu selects options relating to manual control from the joystick keyboard.
5.6.1 Restore Mode (Preset & Tours)
Set this option if you want the dome to revert to a TOUR or PRESET 1 after a specified
period (in seconds) of inactivity.
If the restore mode is not required select OFF
5.6.2 Restore delay (Preset & Tours)
Select restore delay time in seconds. Select 180 seconds to OFF
5.6.3 Joystick/Speed Curve
This option determines the relationship between the joystick offset and the pan/tilt speed
and the setting is a matter of user preference. If linear, the relationship is proportional. If
quasi-linear or non-linear, the movement is slow to start with and increases rapidly as the
joystick is moved more. The default is quasi-linear.
5.6.4 Zoom Ratio
This setting determines how much the pan and tilt slows down as you zoom in and the
setting is a matter of user preference. This slow down helps fine control of the dome position
when zoomed in on a target. The default setting is 16.
5.6.5 Max Joystick Speed
This setting affects pan and tilt and determines how fast the dome moves for a full deflection
of the joystick. Generally control is easier if it is set to less than 100%. The default is 60%.