Videoswitch CMOR D2 Dome - Manual (Page 21)

CMOR Dome
Videoswitch Page 18 Vc601i.doc
GND
CAM1*
GND
Camera input
RS485 (A) RS485 (A) or (+) dome output
RS485 (B) RS485 (B) or (-) dome output
Spare Not connection
GND RS485 ground
Identification DVR
CAM2 (BNC)* DVR camera input (dual camera version only)
CAM1 (BNC)* DVR camera input
CAM2 (BNC) Loop-through provided for test monitor (dual camera
version only)
CAM1 (BNC) Loop-through provided for test monitor
*Note that the video connection(s) made be made either using the BNC or the screw
terminals, whichever is more convenient.