Videoswitch CMOR Vi-D5000 Dome - Manual (Page 3)

PRECAUTIONS
1. Persons without technical qualifications should not attempt to operate this dome device before reading this
manual thoroughly.
2. Remove any power to the dome before attempting any operations or adjustments inside the dome cover to
avoid potential damage to the mechanism.
3. Inside the dome cover there are precision optical and electrical devices. Heavy pressure, shock and other
sudden adjustments or operations should be avoided. Otherwise, you may cause irreparable damage to
the product.
4. Please DO NOT remove or disassemble any internal parts of the video camera to avoid normal operation
and possibly void the warranty. There are no serviceable parts inside the camera.
5. All electrical connections to the dome should be made in strict accordance with the attached labels and
wiring instructions in this manual. Failure to do so may damage the dome beyond repair and void the
warranty.
6. For outdoor installation especially in high places or poles, it is highly recommended that the proper
lightning arrestors and surge suppressors are installed before the dome is entered into service.
7. Please do not use the product under circumstances where the limits exceed the maximum specified
temperature, humidity or power supply specifications.
IMPORTANT SAFEGUARDS
1. Read these instructions before attempting installation or operation of dome device.
2. Keep these instructions for future reference.
3. Heed all warnings and adhere to electrical specifications. Follow all instructions.
4. Clean only with non abrasive dry cotton cloth, lint free and approved acrylic cleaners.
5. Should the lens of the camera become dirty, use special lens cleaning cloth and solution to properly clean
it.
6. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
7. Use only attachments or accessories specified by the manufacturer.
8. Verify that the surface you are planning to use for attaching the dome can adequately support the weight of
the device and mounting hardware.
9. Protect this devices against lighting storms with proper power supplies.
10. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged
in any way, when liquid traces are present, or the presence of loose objects is evident or if the device does
not function properly, or has received sever impact or has been dropped accidentally.
11. Indoor dome is for indoor use only and not suitable for outdoor or high humidity locations. Do not use this
product under circumstances exceeding specified temperature and humidity ratings.
12. Avoid pointing the camera directly to the sun or other extremely bright objects for prolonged period of
time avoiding the risk of permanent damages to the imaging sensor.
13. The attached instructions are for use by qualified personnel only. To reduce the risks of electric shock, do
not perform any servicing other than contained in the operating instructions unless you are qualified to do
so.
14. During usage, user should abide by all electrical safety standards and adhere to electrical specifications for
the operation of the dome. The control cable for RS485 communications as well as the video signal cables
should be isolated from high voltage equipment and high voltage cables.
15. Use supplied power supply only.