Notifier XP10-M 10 - Manual (Page 2)

Page 2 of 2 — DN-6923:B • 05/15/2009
FlashScan® and NOTIFIER® are registered trademarks of Honeywell
International Inc. Microsoft® and Windows® are registered trademarks of the
Microsoft Corporation.
©2009 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Made in the U.S. A.
Product Line Information
XP10-M: Ten-input monitor module.
XP10-MA: Same as above with ULC Listing.
BB-XP: Optional cabinet for one or two modules. Dimen-
sions, DOOR: 9.234" (23.454 cm) wide (9.484" [24.089 cm]
including hinges), x 12.218" (31.0337 cm) high, x 0.672"
(1.7068 cm) deep; BACKBOX: 9.0" (22.860 cm) wide (9.25"
[23.495 cm] including hinges), x 12.0" (30.480 cm) high x
2.75" (6.985 cm); CHASSIS (installed): 7.150" (18.161 cm)
wide overall x 7.312" (18.5725 cm) high interior overall x
2.156" (5.4762 cm) deep overall.
BB-25: Optional cabinet for up to six modules mounted on
CHS-6 chassis (below). Dimensions, DOOR: 24.0" (60.96
cm) wide x 12.632" (32.0852 cm) high, x 1.25" (3.175 cm)
deep, hinged at bottom; BACKBOX: 24.0" (60.96 cm) wide x
12.550" (31.877 cm) high x 5.218" (13.2537 cm) deep.
CHS-6: Chassis, mounts up to six modules in a CAB-4
Series (see DN-6857) cabinet, EQ Cabinet Series (see DN-
60229), or BB-25.