Notifier MPS-950 Series - Manual (Page 2)

Notifier® is a registered trademark of Honeywell International Inc.
©2010 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
Page 2 of 2 — Canadian DN-5497:C1 • 06/22/2010
This document is not intended to be used for
installation purposes. We try to keep our
product information up-to-date and accurate. We
cannot cover all specific applications or anticipate
all requirements. All specifications are subject to
change without notice.
For more information, contact Notifier.
(888) 289-1114
10 Whitmore Road
Woodbridge, Ontario L4L 7Z4
www.notifier.com
Agency Listings and Approvals
• ULC listed: S7568
Specifications
ALL CONVENTIONAL MODELS
Maximum Applied Voltage: 32 VDC
Supply Voltage Nominal: 24 VDC
Average Current Consumption: 400uA, Single stage ver-
sions, 550 uA Two stage versions
Maximum Current Consumption: 550 uA Single stage ver-
sions, 1100 uA Two stage versions
Operating Temperature Range: 0°C to 49°C
Humidity: 10 to 93% noncondensing
Dimensions: 121mm (H) x 82mm (W) x55mm (D)
Weight: 499 Grams Single stage version, 567 Grams Two stage
version
ALL MODELS WITH ANCILLARY CONTACTS
Ancillary Contact Ratings:
• 30 VAC 6 amps Resistive, 6 amps Inductive
• 30 VDC 6 amps Resistive, 3 amps Inductive
NOTE: All models are for use indoors in a dry location.
Product Line Information
CONVENTIONAL MANUAL STATIONS
N-MPS-SC: Conventional single-stage manual station, English/
French lettering.
N-MPS-SCCF: Conventional single-stage manual station.
Form-C alarm and ancillary contacts included. English/French
lettering.
N-MPS-SCB: Conventional single-stage manual station. Blue in
color. English/French lettering.
N-MPS-2C: Conventional two-stage manual station. English/
French lettering.
N-MPS-2CC: Conventional two-stage manual station. Form-C
alarm and ancillary contacts included. English/French lettering.
For addressable manual stations, see DN-60629.
ACCESSORIES
MPS-LP: Lift/pull dual action adapter cover for use with the
MPS Series manual stations. English/French lettering.
RMS-TP3: Mounting plate for semi-flush mounting addressable
manual stations to a 4" square electrical box, red.
RMS-TP1: Mounting plate for semi-flush mounting addressable
manual stations to a two-gang electrical box, red.
MPS-BB: Surface back-box, for use with conventional
models123.83mm(H) x 82.5mm(W) x 44.5mm(D) 4.88"(H) x
3.25"(W) x 1.75"(D).
MPS-ER: Extension ring for addressable models using existing
single-gang electrical boxes.
RMS-GR/10: Replacement break-glass rods. Package of 10.
PS-AWRC-029: Replacement Hex Key
MPS-KEY: Replacement 2nd Stage Key