Kenwood KDC-U7056BT - Manual (Page 18)

36 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 37
8-6. Direct music search
(Function of remote control)
You can search for music by entering the track
number.
1 Press [DIRECT] on the remote control.
“– – –” appears and enter the Direct Music search
mode.
2 Press the number buttons on the remote
control to enter the music number.
3 Press [ENT] on the remote control.
Exiting the Direct music search mode
Press [ 6] on the remote control.
This function cannot be used for a Music Editor media.
• This function cannot be used for media for which database
information is added using KENWOOD Music Editor ( <8-9.
About “KENWOOD Music Editor Light” and “KENWOOD
Music Control”> (page 38)
).
Listen to the CD/ Audio file
8-5. Playback mode
You can select a playback mode, such as Random
play and Repeat play.
1 Press [SRC] to select a CD/ USB (“CD”/ “USB”)
source.
Refer to
<Source selection> (page 10) .
2 Press [Control] knob.
Enters the Function setting mode.
3 Select “Play Mode” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
4 Select a playback mode function using
[Control] knob.
Display Description
“Disc Random” (CD)/
“Folder Random”
(Audio file)
When set to “ON”, plays the songs in the CD/
folder randomly.
* (ON) / i (OFF)
“All Random” (Audio
file)
When set to “ON”, plays all songs in the disc/
USB randomly.
* (ON) / i (OFF)
“Track Repeat” (CD)/
“File Repeat” (Audio
file)
When set to “ON”, plays the selected song
repeatedly.
* (ON) / i (OFF)
“Folder Repeat” (Audio
file [1] )
When set to “ON”, plays the songs in the folder
repeatedly.
* (ON) / i (OFF)
[1] Except the Music Editor media
5 Press [Control] knob.
The setting is changed.
Exiting from the Function setting mode
Press and hold [ 1/6].
8-7. About the Audio file
• Playable Audio files
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav)
of USB device
• Playable disc media
CD-R/RW/ROM
• Playable disc file formats
ISO 9660 Level 1/2, Joliet, Long file name.
• Playable USB devices
USB mass storage class
• Playable USB device file systems
FAT12, FAT16, FAT32
Even if the audio files comply with the standards
listed above, playback may be impossible depending
on the type or condition of the medium or device.
• Playback order of the Audio files
In the example of folder/file tree shown below, files
are played in the order of number from (1) to (6).
CD/USB(1)
¡ (1)
2
3
¡ (4)
4
¡ (2)
¡ (3)
¡ (6)
5
¡ (5)
;: folder
-: Audio file
For the online manual describing audio files, visit
www.kenwood.com/cs/ce/audiofile/ . In this online
manual, detailed information and notes which are
not provided in this manual are provided. Make sure
to read through the online manual as well.
What is a USB device?
• In this manual, the term “USB device” indicates a flash
memory or digital audio player which has a USB terminal.
8-4. Skip search ratio setting
(Music Editor media <8-9. About “KENWOOD Music
Editor Light” and “KENWOOD Music Control”> (page
38) )
You can change the ratio of skip performed as
mentioned in
<8-3. Skip search> (page 35) .
1 Press [SRC] to select a USB (“USB”) source.
Refer to
<Source selection> (page 10) .
2 Press [Control] knob.
Enters the Function setting mode.
3 Select “Settings” > “Skip Search” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
4 Select a ratio using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [ 1/6].