Kenwood KDC-U7056BT - Manual (Page 4)

8 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 9
3. Basic operations
3-1. Component names
(1) [ 1/6] button
When listening to the iPod, audio file, CD, or radio,
press this button to enter the search mode.
In each of the selected modes, press the button to
return to the previous item.
(2) [SRC] button
Press the button to select the source. Refer to
<Source selection> (page 10) .
(3) [Control] knob (Volume knob)
In the normal mode, turn the knob to adjust the
volume or press the knob to enter the Function
setting mode.
In the Function mode, turn the knob to select an
item or press the knob to determine the selection.
(4) [ R]/ [S] button
Press the button to select an audio file folder or
broadcast band, or use it as a Likes/ Dislikes button
on Aha etc.
(5) [ G] button
Press the button to eject the disc.
(6) Disc slot cover
When this cover opens upward, the disc insertion
slot appears
(7) USB terminal (inside of the cover)
Connect an iPod or USB device.
(8) Auxiliary input (inside of the cover)
Connect the output of an external device using a
stereo mini-jack.
(9) REAR USB indicator
When a USB device or iPod is connected to the USB
terminal of the rear, this indicator stays lit. During
3-2. Preparations
Cancel the Demonstration mode
Cancel the Demonstration mode when you use the
unit for the first time after installation.
1 Press [Control] knob to cancel the
Demonstration mode when the message “To
cancel DEMO Press the volume knob” appears
(approx. 15 seconds).
2 Turn [Control] knob to select the “YES”, and
then press [Control] knob.
The Demonstration mode can also be canceled
in the Function Setting mode. Refer to
<12-4.
Demonstration mode setting> (page 59) .
Detaching/ Attaching the faceplate
!
• Remove the faceplate at once after pressing the
Release button; otherwise it can fall down due to
vibration.
• The faceplate is a precision component of the unit
and can be damaged by shocks or jolts.
• Keep the faceplate in its case while detached.
• Do not place the faceplate (and case) in areas
exposed to direct sunlight, excessive heat or
humidity. Also avoid places with too much dust or
the possibility of water splashing.
playback of the connected device, this indicator
blinks.
(10) [ E]/ [F] button
Press the button to select a song or station.
(11) Release button
Press the button to detach the faceplate.
(12) [ Ú] button
Press the button to make, answer, or disconnect a
hands-free call.
3-3. How to select the item
For how to select setting items such as a function
setting item, see the following example:
Example: Setting the Date format of the display
1 Press [Control] knob.
“Function” appears and enters the Function setting
mode.
2 Select the Date Mode function item
Turn [Control] knob to select “Settings”, and
then press [Control] knob.
Next, turn [Control] knob to select “Clock&Date”,
and then press [Control] knob.
Finally, turn [Control] knob to select “Date
Mode”, and then press [Control] knob.
To cancel and return to the previous item, press
[
1/6].
3 Turn [Control] knob to select a format (7
types), and then press [Control] knob.
Returns to the previous item.
4 Press and hold [ 1/6].
Exits the Function setting mode.
About the description in this manual
• In this manual, operations performed in steps 2 and 3 are
described as follows:
2 Select “Settings”
> “Clock&Date” > “Date Mode”
using [Control] knob.
3 Select a format (7 types) using [Control] knob.