Kenwood KDC-U7056BT - Manual (Page 20)

40 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 41
9. Listen to the tuner
9-1. Listening to the radio
Selecting a tuner source
Press [SRC] to select a Tuner (“TUNER”) source.
Refer to
<Source selection> (page 10) .
Selecting a band (FM or AM)
Press [ R].
Selecting a station
Press [ E] or [F].
The seek mode can be changed. Refer to
<Selecting a Seek mode> (refer to below),
<9-5.
Tuner setting> (page 42) .
Selecting a Seek mode
Press [ S].
Display Operation
“Auto1” Automatic search for a station.
“Auto2” Search in order of the stations in the preset memory.
“Manual” Normal manual tuning.
9-2. Station preset memory
You can store a station in the memory.
1 Press [ E] or [F] to select the channel.
2 Press [ 1/6].
Enter the Preset mode.
3 Turn [Control] knob to select a memory
number (FM: “1” – “18”, AM: “1” – “6”).
4 Press and hold [Control] knob.
Exiting the Preset memory mode
Press and hold [ 1/6].
About the Mix Station preset mode
• If you press [ 1/6] twice in step 2, the Mix Station preset
mode is selected with “Mixed Preset List” displayed.
In this mode, different bands and tuner sources (FM, AM,
Digital Radio etc.) can be saved in the same preset layer,
which allows you to recall the desired station without
switching between bands or tuner sources.
A maximum of six stations can be preset in the Mix Station
preset mode.
Once the Mix Station preset mode is set, you can enter the
same mode by just pressing [
1/6] once in step 2.
Pressing [ 1/6] twice allows you to return to the normal
Station preset mode.
9-3. Auto memory
You can register 18 (FM)/ 6 (AM) stations with good
reception automatically.
1 Press [SRC] to select a Tuner (“TUNER”) source.
Refer to
<Source selection> (page 10) .
2 Press [ R] to select a band.
3 Press [Control] knob.
Enters the Function setting mode.
4 Select “Settings” > “Auto Memory” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
5 Select “YES” using [Control] knob.
When 18 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in this mode
is completed.
Exiting from the Function setting mode
Press and hold [ 1/6].
9-4. Recall preset station
Recall the stations in the memory.
1 Press [ R] to select a band.
2 Press [ 1/6].
Enter the Preset mode.
3 Select a memory number (FM: “1” – “18”, AM:
“1” – “6”) using [Control] knob.