Kenwood KRF-V8300D - Manual (Page 51)

English
51
S
u
rround ef
fe
c
ts
Select the listen mode according to the source being played back.
LISTEN MODE
LISTEN MODE
Preparations
• Turn the components to be used ON.
• Complete <Speaker setup>.
• Select the source you wish to play back with
surround sound.
• Select the input mode r.
(When the input mode is set to "Full Auto" or
"Signal Auto" (i.e. when the "AUTO DETECT"
indicator is lit), the listen mode matching the
input signal type and speaker setups is selected
automatically. Noise may be produced when a DTS
source is played by selecting the analog input.)
1
Start playing the selected source.
2
Use [LISTEN MODE] to select the listen mode.
Each press switches the listen mode.
For the types of listen modes, see <Input signals and
corresponding listen modes>
W.
Surround play using the listen mode
B60-5740-00_00_EN.indd 51 B60-5740-00_00_EN.indd 51 08.7.17 3:30:17 PM 08.7.17 3:30:17 PM