Kenwood KRF-V8300D - Manual (Page 8)

8
KRF-V9300D/KRF-V8300D/KRF-V7300D
Bef
o
re u
se
Names and functions of parts
1
(Power) key
Standby indicator
Press to switch this unit ON or to put it
to standby.
The standby indicator lights in the
standby mode.
2
Display
3
Indicators
HDMI Indicator
Lights blue when the HDMI link is on.
DOLBY DIGITAL indicator
Lights up when the DOLBY DIGITAL
signal is input.
DTS indicator
Lights up when the DTS signal is
input.
HIGH DEFINITION indicator
Lights up when one of the following
signals is input through HDMI.
−Dolby Digital Plus
−Dolby True HD
−DTS Master Audio
−DTS High Resolution Audio
STRAIGHT DECODE indicator
Lights up when STRAIGHT DECODE
mode is on.
4
Remote sensor
5
VOLUME CONTROL knob
6
PHONES jack
7
SPEAKERS A/B/OFF key r
Press to select the speakers to be
used.
8
LISTEN MODE knob Q
Turn to select the listen mode.
9
MULTI CONTROL knob
Turn to select a setting item.
4/¢ knob
Turn to skip an iPod track. o
Also used to recall a preset radio
station.
I
MULTI CONTROL ( ∞/5) keys
Press to select a setting item.
Also used to select a radio station.
Y
0
SETUP key º
Press to set up this unit.
!
ENTER key
Press to enter the selected item.
@
KRF-V9300D/KRF-V8300D:
DOLBY VIRTUAL key T
Press to switch the Dolby Virtual
Speaker function or Dolby
Headphones function ON/OFF.
KRF-V7300D:
DIMMER key ˇ
Press to switch the brightness of the
display and indicators.
#
STRAIGHT DECODE key t
Press to switch the STRAIGHT DECODE
mode ON/OFF.
Main unit Main unit
$
BAND key Y
Press to select the broadcasting band.
6 key o
Press to play/pause the music/video
playback of iPod.
%
AUTO/MONO key
Press to switch the radio tuning mode
between auto tuning and manual
tuning.
Y
Also used to select the recording
mode.
P
^
INPUT MODE key r
Press to select the input mode.
&
ACTIVE EQ key Œ
Press to switch the ACTIVE EQ
function ON/OFF.
*
INPUT SELECTOR knob
Turn to select the input source.
(
PURE AUDIO MODE key y
Press to switch the PURE AUDIO
MODE ON/OFF.
)
AV AUX/iPod key
Press to switch the input source
between AV AUX and iPod.
¡
AV AUX jacks
Connect a video camera, videogame
machine, etc.
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system
to back up the memory. This is called
standby mode. Under the condition, the
system can be turned ON by the remote
control unit.
VOLUME CONTROL
AV AUX/iPod
VIDEO L-AUDIO-R
SPEAKERS A/B/OFF
PHONES
LISTEN MODE
MULTI CONTROL INPUT SELECTOR
PURE AUDIO MODE
HDMI LINK READY DTS
DOLBY
DIGITAL
HIGH
DEFINITION
 D
SETUP DOLBY
VIRTUAL
BAND

INPUT MODE
ENTER STRAIGHT
DECODE
AUTO/MONO ACTIVE EQ
STRAIGHT
DECODE
DIMMER
KRF-V7300D
 
B60-5740-00_00_EN.indd 8 B60-5740-00_00_EN.indd 8 08.7.17 3:29:28 PM 08.7.17 3:29:28 PM