Dvd 6 channel analog input, Su rround ef fe c ts – Kenwood KRF-V8300D User Manual

Page 55

Advertising
background image

English

55

S

u

rround ef

fe

c

ts

KRF-V9300D and KRF-V8300D
Virtual mode

These modes allow you to enjoy surround sound even when you
use headphones or you connect only the front speakers.

DOLBY VIRTUAL

DOLBY VIRTUAL

1

Press [DOLBY VIRTUAL].

Each press switches the setting as follows:
Dolby Virtual Speaker mode
(When not using headphones)

Display

Setting

"Dolby VS Wide"

Provides the virtual surround effect with a wider expansion and
spatial feeling.

"Dolby VS Ref"*

Provides the virtual surround effect. This is the standard setting.

"Dolby VS Off"

Sets the Dolby Virtual Speaker mode to off.

* This can be selected when the surround speaker setup is set

to off.

Dolby Headphone mode
(When using headphones)

Display

Setting

"Dolby H On"

Sets the Dolby Headphone mode to on. Provides the virtual
surround effect.

"Dolby H Off"

Sets the Dolby Headphone mode to off.

• In the virtual modes, certain listen modes cannot be selected

depending on the reproduced signal.

• The virtual modes are set to off when the sampling frequency is

either 176.4 kHz or 196 kHz.

DVD 6 channel analog input

Surround play is possible if you use a DVD player with 6- (5.1-)
channel output.

INPUT MODE

INPUT SELECTOR

DVD

Preparations

• Connect your DVD player to the [DVD/6CH IN]

terminals of this unit.

• Turn the components to be used ON.

1

Set the input source to "DVD".

2

Press [INPUT MODE] and select "DVD (6ch IN)"

input mode.

3

Play the DVD.

• It is not possible to adjust the speaker level or sound effect of

the channels separately when this unit is in the 6ch Input mode.
([EASY SETUP] (KRF-V7300D), [SETUP], [SOUND], [LISTEN MODE],
[ACTIVE EQ] and [TONE] will not be functional.) Adjust the speaker
level with the controls of the DVD player. Refer to the Instruction
manual of the DVD players for the detailed operating instructions.

• DVD 6-channel play is not available when "DVD A/V" is selected in

the HDMI input setup. (See <HDMI input setup – "HDMI Input" –>
‚.)

B60-5740-00_00_EN.indd 55

B60-5740-00_00_EN.indd 55

08.7.17 3:30:23 PM

08.7.17 3:30:23 PM

Advertising
This manual is related to the following products: