Kenwood KDC-4654SD - Manual (Page 10)

10
Start playing a disc
1 Press SRC to turn on the power.
2 Insert a disc into the loading slot.
Playback starts automatically.
Start playing a USB device or iPod
1 Press SRC to turn on the power.
2 Connect a USB device or an iPod to the
USB terminal.
The source automatically switches, and
playback starts.
Ejects the disc. (“NO DISC” appears
and “IN” indicator goes off.)
Loading slot
USB terminal
Detaches the faceplate
Press to select track/file.
Hold to fast-forwards/reverses.
Listening to a disc/ USB/ SD/ iPod
USB device (commercially available)
Press to select previous/next folder.
• Not available if “ALL RANDOM” is selected.
Press to pause, press again
to resume playback.
Apple iPod
(commercially available)
CA-U1EX (Max.: 500 mA)
(optional accessory)
KCA-iP102
(optional accessory)
About Audio file
Playable Audio file: AAC-LC (.m4a), MP3 (.mp3),
WMA (.wma)
Playable disc media: CD-R/RW/ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet,
Romeo, Long file name.
Playable USB device file system: FAT16, FAT32
Although the audio files are complied with the standards
listed above, the playback maybe impossible depending
on the types or conditions of media or device.
About USB device
This unit can play AAC/MP3/WMA files stored on a USB
mass storage class device.
Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
You cannot connect a USB device via a USB hub and
Multi Card Reader.
Make sure all important data has been backed up to
avoid losing the data.
Connecting a cable whose total length is longer than
5 m can result in abnormal playback.
EN_KDC-4754SD[E]f.indd 10 EN_KDC-4754SD[E]f.indd 10 10/20/11 5:21:04 PM 10/20/11 5:21:04 PM