Kenwood KDC-4654SD - Manual (Page 17)

17
ENGLISH
Symptom Remedy/Cause
“NA DEVICE” appears. Connect a supported USB device, and check the connections. / Check that the
supported SD card is inserted.
“USB ERROR” appears. Remove the USB device, turn the unit off, then turn it on again. If the unit still
showing the same display, try to connect another USB device.
“iPod ERROR” appears. Reconnect the iPod. / Reset the iPod.
Noise is generated. Skip to another track or change the disc.
Tracks cannot play back as you have
intended them to play. Playback order is determined when files are recorded.
“READING” keeps flashing. Longer readout time is required. Do not use too many hierarchies and folders.
Elapsed playing time is not correct. This is caused by how the tracks are recorded.
The number of songs contained in
“SONGS” category of this unit is different
from that contained in “SONGS” category
of iPod. Podcast files are not counted in this unit as this unit does not support the playback
of podcast files.
Correct characters are not displayed (e.g.
album name). This unit can only display letters (upper case), numbers, and a limited number of
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET] is
set to [ON]. (page 7, 8)
About “KENWOOD Music Editor”
This unit supports the PC application “KENWOOD Music Editor Light ver1.1” or later.
When you use the audio file with database information added by the “KENWOOD Music Editor Light ver1.1,” you can
search a file by title, album or artist name using Music Search.
In the Instruction manual, the term “Music Editor Media” is used to mean the device that contains audio files with
database information added with KENWOOD Music Editor.
“KENWOOD Music Editor Light ver1.1” is available from the following web site: www.kenwood.com/cs/ce/
For further information on “KENWOOD Music Editor Light ver1.1,” refer to the site above or the application help.
EN_KDC-4754SD[E]1.indd 17 EN_KDC-4754SD[E]1.indd 17 9/8/11 10:35:09 AM 9/8/11 10:35:09 AM