Kenwood KDC-4654SD - Manual (Page 19)

19
ENGLISH
Wiring connection
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
MUTE
P. CONT
ANT CONT
SW
FRONT
R L REAR
R L REAR/SW
Fuse (10 A)
Antenna terminal (JASO)
Light blue/yellow
(Steering remote control wire)
To the steering wheel remote control adapter
Blue/White
(Power control wire/ Antenna
control wire)
Brown
(Mute control wire)
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Front output terminals
Subwoofer output terminals
Rear output terminals
Rear/subwoofer output
terminals
Pin Color and function Pin Color and function
A4 Yellow Battery B1 / B2 Purple ª / Purple/black · Rear speaker (right)
A5 Blue/White Power control B3 / B4 Gray ª / Gray/black · Front speaker (right)
A7 Red Ignition (ACC) B5 / B6 White ª / White/black · Front speaker (left)
A8 Black Earth (ground) connection B7 / B8 Green ª / Green/black · Rear speaker (left)
ISO connectors
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Unit Vehicle
A7 (Red)
Ignition wire
(Red)
A4 (Yellow)
Default wiring
Battery wire
(Yellow)
EN_KDC-4754SD[E]2.indd 19 EN_KDC-4754SD[E]2.indd 19 10/6/11 3:12:45 PM 10/6/11 3:12:45 PM