Kenwood KDC-4654SD User Manual
Page 14
14
[AUDIO CONTROL] / [AUDIO CTRL] : While listening to any source except in STANDBY state...
Item
Selectable setting (Preset: *)
EQ PRO
BASS ADJUST
BASS CTR FRQ/ BASS C FRQ
60/ 80/ 100 */ 200: Selects the center frequency.
BASS LEVEL
–8 — +8 (Preset: 0): Adjusts the level.
BASS Q FACTOR/ BASS Q
FCTR
1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND
ON: Turns on the extended bass. ; OFF *: Cancels.
MID ADJUST
MID CTR FRQ/ MID C FRQ
0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency.
MID LEVEL
–8 — +8 (Preset: 0): Adjusts the level.
MID Q FACTOR/ MID Q FCTR
0.75/ 1.00 */ 1.25: Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ/ TRE C FRQ
10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.
TRE LEVEL
–8 — +8 (Preset: 0): Adjusts the level.
PRESET EQ
NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset sound mode
suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS BOOST
B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ;
B.BOOST OFF *: Cancels.
LOUDNESS
LOUDNESS LV1 */ LOUD LV1 */ LOUDNESS LV2/ LOUD LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume level. ;
LOUDNESS OFF/ LOUD OFF: Cancels.
BALANCE
L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.
FADER
R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.
SUBWOOFER SET/
SUB-W SET
ON *: Turns on the subwoofer output. ; OFF: Cancels.
DETAILED SET/ DETAIL SET
HPF
THROUGH *: All signals are sent to the speaker. ; 100HZ/ 120HZ/ 150HZ: Frequencies lower than the
specified value are cut off.
LPF SUBWOOFER/
LPF SUB-W
THROUGH *: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher than
specified value are cut off.
SUB-W PHASE
REVERSE/ REV
(180°)/ NORMAL/ NORM (0°) *: Selects the phase angle of the subwoofer output to
be in line with the speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH] is selected for [LPF SUBWOOFER/ LPF SUB-W].)
SUPREME SET
ON *: Creates realistic sound by interpolating the high-frequency components that are lost in AAC/
MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an AAC/MP3/WMA
disc or a USB device, except iPod.)
VOLUME OFFSET/
VOL OFFSET
(Preset: 0)
–8 — +8 (for AUX) ; –8 — 0 (for other sources): Presets the volume adjustment level of each
source. The volume level will automatically increase or decrease when you change the source. (Before
making an adjustment, select the source you want to adjust.)
EN_KDC-4754SD[E]1.indd 14
EN_KDC-4754SD[E]1.indd 14
9/8/11 10:35:09 AM
9/8/11 10:35:09 AM