Kenwood KDC-4654SD - Manual (Page 13)

13
ENGLISH
Preparation : Make sure [ON] is selected for [BUILT-IN AUX] / [BUILTIN AUX]. (page 7, 8)
3.5 mm stereo mini plug
(commercially available) Portable audio device
(commercially available)
Auxiliary input jack
Listening to the other external
components
1 Press SRC to select “AUX.”
2 Turn on the external component and
start playing.
3 Turn the volume knob to adjust the
volume.
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CONTROL] / [AUDIO CTRL] or [SETTINGS], then
press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
Repeat step 3 until the desired item is selected/activated.
Press to return to the previous item.
4 Hold to finish the procedure.
[AUDIO CONTROL] / [AUDIO CTRL] : While listening to any source except in STANDBY state...
Item Selectable setting (Preset: *)
SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.
BASS LEVEL –8 — +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before
making an adjustment, select the source you want to adjust.)
MID LEVEL
TRE LEVEL
Function settings
Continued...
EN_KDC-4754SD[E]1.indd 13 EN_KDC-4754SD[E]1.indd 13 9/8/11 10:35:08 AM 9/8/11 10:35:08 AM