Kenwood KMR-700U User Manual
Page 15
English
|
15
Audio Preset Memory
Registering the values setup within Sound Controls.
These settings cannot be erased by the Reset
button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 14)
- <Adjusting the detail of Audio Control> (page 14)
- <Audio Setup> (page 14)
2
Select Audio Preset item
Select the “Audio Preset” display.
For how to select Menu items, refer to <Menu
System> (page 8).
3
Enter Audio Preset mode
Press the [ENTER] button for at least 1 second.
“Recall” is displayed.
4
Select the Audio Preset Memory
Turn the [VOL] knob.
Select the “Memory” display.
5
Determine whether to put the Audio Preset in
the memory
Press the [ENTER] button.
“Memory?” is displayed.
6
Put the Audio Preset in the memory
Turn the [VOL] knob to select “YES”, and then
press the [ENTER] button.
“Memory Completed” is displayed.
7
Exit Audio Preset mode
Press the [
] button.
⁄
• The memory only holds one audio setting and not
settings for each source.
• The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 15).
1
Select the source
For how to select source item, refer to <General
function> of <Basic Operation> (page 6).
2
Select Audio Preset item
Select the “Audio Preset” display.
For how to select Menu items, refer to <Menu
System> (page 8).
3
Enter Audio Preset mode
Press the [ENTER] button for at least 1 second.
4
Select the Audio Preset Recall
Turn the [VOL] knob.
Select the “Recall” display.
5
Determine whether to recall the Audio Preset
Press the [ENTER] button.
“Recall?” is displayed.
6
Recall the Audio Preset
Turn the [VOL] knob to select “YES”, and then
press the [ENTER] button.
“Recall Completed” is displayed.
7
Exit Audio Preset mode
Press the [
] button.
⁄
• The User memory of “System Q” in <Audio Control>
(page 14) is changed to the value which was recalled.
• The source tone memory item of <Audio Control> (page
14) is changed to the value which was recalled by the
selected source.
4
Adjust the Audio setup item
Press the [ ] or [ ] button.
5
Exit Audio Setup mode
Press the [ENTER] button for at least 1 second.
B64-4406-00_00_KMR-700U_K_en.indd 15
B64-4406-00_00_KMR-700U_K_en.indd 15
09.2.16 11:00:10 AM
09.2.16 11:00:10 AM