Remote control (optional accessory) setup – Kenwood KMR-700U User Manual
Page 20
20
|
KMR-700U
Remote control ID setup
When connecting the remote control KCA-RC107MR
(Optional accessory) to this unit, you should register
the ID for KCA-RC107MR.
1
Enter Remote control setup mode
Press the [2ZONE] button for at least 1 second.
2
Select the Remote control ID setup item
Turn the [VOL] knob to select “Remote ID Set”,
and then press the [ENTER] button.
Remote control ID list is displayed. “Yes” indicates
that this ID is already registered. “No” indicates that
this ID is available.
3
Enable Remote control ID registration
Press the [ENTER] button.
“Registing...” is displayed.
4
Register Remote control ID
For KCA-RC107MR, press the [ENTER], [SRC], or
[DISP] button.
Button
Remote control ID
[ENTER]
ID1 is registered.
[SRC]
ID2 is registered.
[DISP]
ID3 is registered.
“ID# Setup Completed” is displayed.
5
End Remote control setup mode
Press the [2ZONE] button.
Cancelling Remote control ID setup
Press the [2ZONE] button for at least 1 second.
⁄
• When removing KCA-RC107MR, delete the registered
remote control ID, as described in <Remote control ID
delete> (page 20).
Remote control (Optional accessory) setup
Remote control ID delete
Delete the ID registered for the remote control KCA-
RC107MR (optional accessory).
1
Enter Remote control setup mode
Press the [2ZONE] button for at least 1 second.
2
Select the Remote control ID delete item
Turn the [VOL] knob to select “Remote ID
Delete”, and then press the [ENTER] button.
List of the IDs registered for remote controls is
displayed.
3
Select the remote control ID to be deleted
Turn the [VOL] knob.
4
Delete the Remote control ID
Press the [ENTER] button.
“Remote ID# Delete?” is displayed.
5
Turn the [VOL] knob to select “YES”, and then
press the [ENTER] button.
“ID# Delete Completed” is displayed.
6
End Remote control setup mode
Press the [2ZONE] button.
Cancelling Remote control ID delete
Press the [2ZONE] button for at least 1 second.
Dual zone control setup
When the dual zone function is set to ON, select the
channel, either front or rear, to be controlled by the
remote control KCA-RC107MR (optional accessory).
1
Enter Remote control setup mode
Press the [2ZONE] button for at least 1 second.
2
Select the Dual zone control setup item
Turn the [VOL] knob to select “Remote Zone
Select”, and then press the [ENTER] button.
Current settings are displayed for the registered
remote control IDs.
3
Select the target remote control ID
Press the [u] or [d] button.
4
Select the target channel
Press the [ ] or [ ] button.
Display
Controlled channel during dual zone mode
“Front”
Front channel is controlled.
“Rear”
Rear channel is controlled.
5
End Remote control setup mode
Press the [2ZONE] button.
B64-4406-00_00_KMR-700U_K_en.indd 20
B64-4406-00_00_KMR-700U_K_en.indd 20
09.2.16 11:00:10 AM
09.2.16 11:00:10 AM