Connecting wires to terminals – Kenwood KMR-700U User Manual

Page 24

Advertising
background image

24

|

KMR-700U

Connecting Wires to Terminals

P.CONT

SUB

REAR

PRE OUT

FRONT

AUX IN

HEAD UNIT

POWER

ANTENNA

SIRIUS I/F

REMOTE CONTROL

ILLUMI

R

R

R

R

L

L

L

L

Battery

Ground wire (Black) - (To car chassis)

FM/AM antenna input*

Fuse

(15A)

I/F cable (Accessory2)

Wiring harness
(Accessory1)

Ignition wire (Red)

Battery wire (Yellow)

ACC

Fuse box

If no connections are made, do not let the wire come out from the tab.

To front left speaker

To front right speaker

To rear left speaker

To rear right speaker

White/Black

White

Gray/Black

Gray

Green/Black

Green

Purple/Black

Purple

Ignition key switch

Fuse box

(Main fuse)

Power control/Motor antenna control wire
(Blue/White)

Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.

Secure the I/F cable (Accessory 2)
with a Clamper (Accessory 6).

Main unit

KCA-RC107MR
(Optional accessory;
Maximum of 3 remote controls)

To SIRIUS
unit*

To Remote
control*

Subwoofer preout

Rear preout

Front preout

Aux input

Dimmer control wire (Orange / White)

To car light control switch

* Terminals are provided

with covers. Remove the
cover from the terminal
before connecting it to
the cable.

Clamper
(Accessory6)

B64-4406-00_00_KMR-700U_K_en.indd 24

B64-4406-00_00_KMR-700U_K_en.indd 24

09.2.16 11:00:11 AM

09.2.16 11:00:11 AM

Advertising