Teledex Millennium Series - Manual (Page 8)

MILLENNIUM DISPLAY FUNCTIONS
The Millennium LCD display is a 3 line backlit LCD that can provide the guest with valu-
able information about available services and amenities.
WELCOME MESSAGE
The Millennium can display up to three different welcome messages, in groups of 15 char-
acters, when the phone is not in use. The messages can be displayed in a number of formats
and combinations.
BILLBOARD SCROLL
The first letter on the message will appear on the right side of the LCD. Each subsequent
character will be displayed, one at a time, on the right of the LCD moving the previous
character left one space.
Once all fifteen (15) display spaces are filled, the first character displayed, on the extreme
left of the LCD, will drop off the display. This continues until the entire message is dis-
played or the maximum message length of 45 characters is completed.
At that time, the Millennium can repeat the message or begin to display the next 45 charac-
ter message.
COMPLETE 15 CHARACTER BLOCK REPLACEMENT
This method of displaying the Welcome Message places the first 15 characters of the mes-
sage on the LCD and then replaces them with the next 15. This continues until the entire
message is displayed or the maximum message length of 45 characters is completed.
At that time, the Millennium can repeat the message or begin to display the next 45 charac-
ter message.
6
TIME INTERVAL REPLACEMENT
The Millennium can switch from one pre-programmed message to another based on a set
time interval. You can select to have messages switched every 6, 12 or 24 hours.
This function allows the hotel to provide a new, fresh message to the guest on a periodic
basis. Although the messages will be changed on a periodic basis, it is important to refrain
from using time interval specific messages.
It is important to note that if TIME INTERVAL REPLACEMENT is activated and the line
cord to the Millennium is disconnected, causing the Millennium to lose power, the internal
timer will reset to zero. Once power is restored the timer will restart and WELCOME
MESSAGE #1 will be displayed.
See PROGRAMMING THE MILLENNIUM on page 10 for information on how these
messages are stored and the display options are selected.
EXPRESS SERVICE SELECT
The Millennium’s EXPRESS SERVICE SELECT function is a name and number electron-
ic phone book. Entries can be up to 15 numbers to be dialed with a 15 character descrip-
tion.
When a guest presses the MENU key, instructions will be displayed on the LCD.
7