MagTek Excella STX99875342 - Manual (Page 13)

5
SECTION 2. INSTALLATION
This section describes the Installation of the Excella STX.
INSTALLATION SUMMARY
A summary of the major installation steps for Excella STX follows:
1. Unpack Excella STX
2. Remove two covers and install 2 ink cartridges (the cartridges are shipped uninstalled)
3. Install Excella STX API/Demo software (CD provided by MagTek)
4. Connect interface cable (USB or Ethernet) and power cable to Excella STX
5. Connect power cord to AC wall outlet
6. Connect interface cable to PC
7. When using the USB interface, run the “ExcellaUSBConfig” utility (see Appendix B) to
establish a connection between the PC and Excella STX.
COVER REMOVAL
Two covers must be removed before the two Printer/Cartridges can be installed. Proceed as
follows: