Configuration – MagTek Excella STX99875342 User Manual
Page 32
Advertising
Excella STX Installation and Operation
24
Caution
Do not turn off power to Excella STX during the update process.
If power is turned off, Excella STX will hang up and the unit
may have to be returned to the factory.
4. When completed, the "Firmware Update" message will appear with information as follows:
Filename = ms117x.mef
Size = 413816 bytes
Upgrade completed
5. At this time, cycle the power of Excella (Off/On).
CONFIGURATION
The Configuration Pages, Figures A-4, A-5, and A-6 offer options to setup the Network,
Ethernet, and USB configurations. Additionally, an option is provided to save and restore device
(Figure A-7) configurations. A general description for all the options follows.
Advertising