MagTek Excella STX99875342 - Manual (Page 39)

31
APPENDIX B. USB CONFIGURATION UTILITY
OVERVIEW
MagTek’s “ExcellaUSBConfig” utility (Figure B-1) is used to configure Excella STX for the
USB interface ONLY. The utility will automatically select and configure IP address for the PC
and Excella STX.
Note
ExcellaUSBConfig must be run to establish a connection between
the PC and Excella STX.
After Excella STX’s API/Demo has been installed, ExcellaUSBConfig can be found on the
following directory: C:\Program Files\Magtek\Excella-STX Demo.
Figure B-1. ExcellaUSBConfig Utility Screen