MagTek IntelliCAT99875658 User Manual
Page 3
<IntelliCAT>| <Migration to Windows 7> | <User Support Document>
Page 3
1. Detailed Steps for migrating to Windows 7, 32/64bit
Using MtAdmIn.MDB local and networked including reference to SQL
Before you begin the new install, open
DATA ENTRY
on the old PC, click on
HELP ABOUT
. If the
Version is 1.8.XX or lower, the IntelliCAT setup is referred to as a 1.XX install. New IntelliCAT
Software is required. Contact your MagTek Representative at 562-546-6400 to order new Software.
If the Version 2.XX is present, the current setup is using updated IntelliCAT and you may use the
current ASM IntelliCAT software disk for the new installation.
Login to the PC as an Administrator will full rights. Turn off UAC during the installation. Go to Control
Panel, Folder Options and uncheck “Hide Extensions for known file types” and install all drivers and
software by right clicking and “Run As Administrator”. Turn UAC back on if required by your institution
after the IntelliCAT is setup and working correctly.
Do not shut down the old PC until you collect specific files as directed below.