MagTek OMTD 99875144 - Manual (Page 11)

5
SECTION 2. INSTALLATION
MagTek Device Drivers (MTD) must be installed before installing the OMTD. Refer to MagTek
Device Drivers for Windows, Technical Reference Manual, P/N 99875125.
OMTD INSTALLATION NOTES
The OMTD extensions to the MTD Drivers are installed as part of the MTD installation package.
When installing the MTD drivers, check the OPOS Support option at the top of the list.
Selecting the OPOS Support option triggers the installation of all of the OMTD controls. It also
copies all CO and SO packages, and adds registry entries under the OPOS service provider key.
Additionally, all of the installed MTD devices will be configured for OPOS operation. Each
MTD driver will be mapped to the service object for all device classes supported by the
particular device.
Note
When installing the OPOS Support on Windows 2000 and XP, you will need to
manually configure the devices by using the OMTDCFG configuration utility.
See Modifying and Removing Devices below for more information.