MagTek OMTD 99875144 - Manual (Page 25)

Section 4. Control Objects
19
MICR Methods
The MagTek MICR devices do not require processing of the following methods, so they will
always return OPOS_SUCCESS.
BeginInsertion(LONG Timeout)
Called to initiate check insertion processing.
EndInsertion()
Called to end check insertion processing.
BeginRemoval(LONG Timeout)
Called to initiate check removal processing.
EndRemoval()
Called to end check removal processing.
PINPAD DEVICE CLASS
The following sections describe those properties and methods that are specific to the PINPad
device class.